Continuous Flow Mixer with Telescopic Loading Tube
- Blends and single-size products through one shared loadout point
- Combination of continuous flow mixer, shuttle carriage, single-product chute and telescopic loading tube
- Controlled, low-dust transfer of material onto open trucks
- Can be integrated into WÖHWA blending and loadout systems
Mixing and loadout in one flexible system
Blends pass through the continuous flow mixer, while unmixed single-size products pass through the separate single-product chute for loadout.
The shuttle carriage allows the continuous flow mixer and single-product chute to use the same loadout point.
Eight offset mixing arms provide intensive, multidirectional mixing of different size fractions.
The telescopic loading tube guides the material onto the truck, supporting controlled loadout with reduced dust.
Depending on the order, blends or single-size products can be discharged through the same loadout station.
Different material paths are brought together in a shared loadout solution.
Material guidance, the lifting system and sensors support safe and controlled loadout.
The combination can be fully integrated into WÖHWA blending control systems or supplied with a separate control system.
Engineered components for flexible mixing and loadout
From mixing different size fractions to controlled truck loading, the solution combines coordinated components to handle different materials and loadout requirements.
Positions the continuous flow mixer and single-product chute at the shared loadout point.
Unmixed single-size products can be fed directly to the loadout point without passing through the mixer.
Eight offset mixing arms provide intensive, multidirectional mixing.
Wear-resistant blades can be replaced individually as required, simplifying maintenance.
The wear-resistant lining protects the mixing hopper when processing abrasive bulk materials.
The centering cone feeds the material centrally into the telescopic loading tube, supporting a uniform material flow.
The highly wear-resistant discharge sleeve concentrates the material during loadout.
The loading bell with its abrasion-resistant rubber skirt helps minimise dust during material transfer.
A lifting travel of 3,000 mm allows the telescopic loading tube to adapt to different loading situations.
Types 15.10 to 15.16
Throughput: 360 to 1,200 t/h
Maximum particle size: up to 60 mm, depending on model size
Dual mixing assembly with eight offset mixing arms
Shuttle carriage width: 1,630 mm
Shuttle carriage length: 2,550 to 3,150 mm, depending on model size
Separate single-product chute for direct loadout of unmixed size fractions
The mixer and single-product chute share one loadout point
Lifting travel: 3,000 mm
Retracted height: 2,150 mm
Extended height: 5,150 mm
Upper transfer diameter: 800 mm
Lifting motor: 2.2 kW
Geared limit switch for upper and lower lifting limits
3 slack rope switches
1 ultrasonic sensor
3 tilt switches
Can be integrated into the WÖHWA blending control system or operated with a separate control system
More solutions for your material and liquid flows
The right mixing and loadout solution for your plant
Whether blends, single-size products or different loadout requirements: we help you select and specify the right combination of continuous flow mixer and telescopic loading tube.
