Batching combination type 10.2 with sealed gate 08.1 RD
- Belt feeder type 10.2 RD combined with double-flange sealed gate 08.1 RD
- Continuous feeding with a variable-frequency drive
- Adjustable seals for fine-grained, dry and dusty bulk materials
- Trapezoidal belt with lateral material guides to reduce material loss
Controlled material discharge with a versatile belt feeder
Continuous, uniform feeding and controlled discharge of bulk materials from silos and storage bins. The type 10.2 RD is suitable for a wide range of tasks in the bulk materials industry.
The combination with gate 08.1 RD is suitable for free-flowing, fine-grained, dry and dusty bulk materials from 0 to 4 mm. The belt design depends on material, particle size, bulk density and required capacity.
Belt widths from 650 to 1,200 mm, centre distances from 1,560 to 4,560 mm and material bed heights from 200 to 400 mm. Special lengths are available following technical assessment.
The adjustable seals on the double-flange sealed gate support reliable isolation and controlled material release. The belt feeder then provides uniform discharge.
The gate's adjustable seals provide effective sealing for fine-grained, dry and dusty materials.
The variable-frequency drive enables adjustable belt speeds and feed rates to suit demand.
The vulcanised trapezoidal profile works with the lateral material guides to improve sealing and reduce material spillage.
The belt's modular, hot-dip galvanised steel construction is designed for a long service life and straightforward maintenance. Plough and FTK outer belt cleaners clean the belt.
Matched belt and gate components
The combination pairs the versatile belt feeder type 10.2 RD with the double-flange sealed gate 08.1 RD. The belt provides continuous feeding and controlled material discharge. The design depends on material, particle size, bulk density and required capacity.
The seals on gate 08.1 RD are externally adjustable and designed for reliable sealing of the gate blade.
The gate's rollers are accessible from the outside and can be replaced for servicing.
The gate's rack and pinion drive is maintenance-free, self-cleaning and easy to replace.
The limit switches detect the position of the double-flange sealed gate.
The bolted, replaceable wear lining protects areas of the gate exposed to wear.
The belt speed can be adjusted as required, matching the feed rate to the material and process requirements.
The vulcanised trapezoidal profile works with the lateral material guides to improve sealing and reduce material spillage.
A plough cleaner cleans the inner belt surface, and an FTK outer belt cleaner cleans the outer belt surface.
Belt widths: 650 to 1,200 mm
Centre distances: 1,560 to 4,560 mm
Material bed heights: 200 to 400 mm
Belt capacity: up to approx. 1,200 t/h, depending on material, particle size, bulk density and belt design
Special lengths: available following technical assessment
Belt type: trapezoidal belt with a vulcanised trapezoidal profile
Lateral sealing: trapezoidal profile combined with lateral material guides
Construction: robust, hot-dip galvanised, modular steel construction
Material feed: inlet hopper with adjustable material bed height
Drive: variable-frequency control for adjustable feed rates
Inner belt cleaning: plough cleaner
Outer belt cleaning: FTK outer belt cleaner
Gate: double-flange sealed gate 08.1 RD
Gate discharge opening sizes: 200 × 200 to 500 × 600 mm, in 100 mm increments
Particle size for gate applications: 0 to 4 mm
Gate drive: 0.9 / 1.1 kW
Gate supply voltage: 230/400 V, 50/60 Hz
Gate protection rating: IP65
Gate opening and closing speed: approx. 100 mm/s
Equipment: adjustable seals, replaceable rollers, non-contact limit switches and Hardox wear lining
Depending on the application, options include wear protection, material monitoring, monitoring and safety devices, automatic belt tensioning, special pulley designs, dust protection and water drainage systems.
Further project-specific versions are available following technical assessment.
The batching combination with sealed gate 08.1 RD in operation
The product animation shows how the belt feeder and double-flange sealed gate 08.1 RD work together, illustrating the combination's main functions and components.
More solutions for your material and liquid flows
The right batching combination for your application
Tell us about the material, particle size, bulk density, required capacity and installation conditions. We help you select the right belt and gate design.
